Long range digital HDTV antenna converter box combo UHF/VHF
This antenna is suggested for Range green to peach, and under "optimal conditions" This Antenna has shown to grab stations thats over 150 Miles!
Please use our address check tool on the bottom of the page to find out your local signal types. Results may vary. With the new digital conversion, all USA TV broadcast are now transferred with the new UHF (ultra high frequency). The good news is that with the new UHF frequency, we now can enjoy digital programming with high def pictures free to our TV. With more stations than ever, as normal stations like exp: channel 9 now becomes 9.1, 9.2, 9.3c and this new TV broadcast system is called DTV. In order to enjoy this new free service, viewers must ether own a digital TV (not just HDTV ready), or any analog TV with a digital converter box.
This package, are best used by viewers locations around 45 ~ 100+ range from the broadcast stations. By far the best combo for long range viewers by adding the most powerful outdoor directional antenna on the market with high gain of 36 db, and the Iview digital converter box system to obtain the maximum amount of stations.
Features:
Support all OTA, FTA stations
Built-in high gain booster
Parabolic focusing reception
UHF/VHF TV and FM radio
Super active outdoor antenna
High quality far ranging reception, up to 150 miles tested range (opt condition)
Optional manual operation
360 degree rotation by remote control
Easy to install and operate
Built in high gain booster
Built in low noise circuit
Easy to Install
Maximum Signal Amplification
New Double Wing Reflector Dish for 2x Amplification
G2 Unit Come with build in amplifier supports up to 15 ~ 40 db Gain for VHF/UHF (For city used and Long Range Power when you need it)
Can be also used as an TV booster
Range finder dial, full control of 0 ~ 150 mile signal (turn off for local stations, and on for stations in another city or town
Support up to 2 TVs
Wireless remote control
can replace any existing outdoor antenna TV control unit with cox cable support
Support all OTA, FTA stations
Plug and Play
Remote
Power supply
Replace old control unite, or use to support new TV
(G2 unit do not come with the decorative red end cap)
Technical Specification:
Frequency(VHF)
40-300MHz
Frequency(UHF)
470-860MHz
Gain(VHF)
25E to 32dB
Gain(UHF)
29 to 35dB
Power
3W
Max. Rotation
360˚
Impedance
75Ω
Max. Output Level
145 dBV
Working Voltage
110V/60Hz
DC Input
15-19V
Digital converter boxes receive over-the-air digital TV broadcasts for viewing on TVs that do not have built-in digital tuners. If you wish to keep using your analog TV set, you must purchase a digital converter box. This box receives over-the-air digital TV broadcasts for viewing on a TV that does not have a built-in digital (ATSC) tuner. Additional features include EPG (Electronic Programming Guide), RCA output, antenna RF input (F-type connector), RF output, Closed Caption, and remote control.
This is the 2000TB model (not the old 1000TB)
Converts digital broadcast to your analog tv
Electronic program guide
Parental control function
Auto tuning (finds all digital broadcasts)
Integrated ATSC Tuner
FEATURES:
Fully ATSC compliant for USA with NTIA Certification
Receives ATSC Terrestrial broadcast Channels 2-69
256 colors on screen display (OSD) supported
Electronic Program Guide (EPG)
Favorite channel edit
Multi-language OSD (English, French, Spanish)
Multi-language audio supported
Multi-language Subtitle output supported
Parent control (V-chip)
SPECIFICATIONS:
TUNER ATSC
Band coverage VHF 2 ~ 13, UHF 14 ~ 69
Band width 6MHz
Input Frequency 54 ~ 860MHz
Signal Input IEC Female(RF IN)
CHANNEL DECODING
Standard ATSC
Standard ISO/IEC 13818-1
VIDEO DECODING
Standard ISO/IEC 13818-2, MPEG-2 MP@ML
Frame/Field Rate 30/60 Hz
SD Decoding Capability 720i
Aspect Ratio 4:3, 16:9
Video Resolution 720480 (NTSC)
Audio Output Stereo, Mono Dual, Joint Stereo, and
Video De-emphasis CCIR REC.405-1, 625LINES
Video Bandwidth 5.5MHz
FRONT PANEL
IR Receiver 38KHz
KEY Power on/off
REAR PANELS
75-ohm V/UHF Input
RF out 75 Ohm F-Connector (NTSC Channel 3 or 4,NTSC Loop Through)
